All About SS Daily News

Electrician Mitchelton

Nov 7

Electrical Safety Tips for the Workplace


Nowadays electricity is the power source for every workplace and office around the globe. From machines to computers electric equipment, it can all pose dangers if operated or maintained incorrectly, which can result in burn or shock injuries. Although the majority of employees don't require special electrical safety training, it is important to observe electrical safety-related guidelines to keep yourself and your coworkers secure. If you operate with electricity but are not educated to handle electrical components specifically, here are some guidelines for electrical safety in the workplace to aid you as well as electrician Mitchelton protect yourself from electrical hazards:


1. Avoid any possible contact with electrical currents that are live.


Avoiding electrical hazards is the best way to be safe. Unqualified individuals shouldn't touch or interact with currents of more than 50 volts. If you are working in an area prone to electrical hazards or have equipment running on 50 volts or more Keep your distance. Before starting your project, ensure that all panel doors shut and there are no wires exposed within your space.


2. Utilize Lockout/Tagout for de-energized equipment.


Prior to working with or near live electrical components that are exposed, they must be de-energized. To prevent electrical energy from getting released, lock and tag affected parts or systems according to the company's policy on lockout and tagout.


Lockout/tagout shields employees from electrical hazards when they are conducting maintenance and service tasks.


3. Use electrical appliances in a safe manner.


Utilizing all electrical equipment in a safe manner can go a long way to ensure the safety of everyone when working.


Employees should take care of the electrical wires.


  • The plug head is to be pulled on rather than pulling on the cord to disconnect cords.

  • Be careful not to stretch or squeeze electrical cables.

  • Staples are not recommended for cords.

  • Electrical equipment should not be hung from cords.

Additionally, every cord and outlet in the workplace must be visually checked for any external defects prior to use. Never use a damaged cord or plug.


4. Make sure electrical hazards are protected with appropriate Physical Barriers


Employers must be protected from electric hazards using physical barriers. The doors of cabinets for electrical panels should be closed and no holes should be made inside them to ensure employees have not exposed wires.


Shields barriers, shields, or insulation materials are recommended if cabinets can't be closed or the electrical risk is not entirely enclosed.


Physical barriers must be put in place in order to block anyone from accessing the area where a trained electrician conducts maintenance on an electrical panel and keeps the panel open. Signs should be posted to warn employees about the dangers and all obstructions in the vicinity of the panel should be removed.


5. Conductive Tools and Cleaning Materials Must Be Avoided


If you are working in an area that has potential electrical hazards, you must be sure that the electrical components are alive. Do not use conductive tools in this space.


Cleaning the area using cleaning products that are conductive should be done with caution. The region is electrically conductive due to metalized cloth and solvent- and water-based cleaning products. Cleaning products, along with any conductive instruments must be kept clear of electric components and equipment.


6. When working above the ground, look for electric lines.


If you're working or maintenance up high ensure you be aware of the electrical lines. Many businesses may have active electrical equipment or pieces that are located above floor level. This can only be accessed via ladders or high platforms. Make use of a ladder that is portable and has nonconductive side rails when performing the tasks mentioned above. Be sure to keep at least 10 feet away from exposed electrical wires.


MRF Electrical pty ltd
Chermside West Brisbane QLD 4032
07 3184 4189 function=detail&type=power&listing_no=1916076&_UserReference=7F00000146B49348E450E3C465EF5FFEF4F2,6-traves-street-chermside-west-brisbane,-qld-4032-l5mLAJeZiwA.html